2015年1月25日星期日

Supply 15 Ton (180,000 Btu) Sea Water Cooled Condenser /Evaporator/Heat Exchangers


Features of 180,000BTU Coaxial Heat Exchanger :

Heat exchanging capacity: 52.5Kw
                                        = 180,000BTU/hr;

Inner tube material: twisted type titanium tube,twisted tube (with twisted 4 leads,6 leads ),


Φ35×0.8x15000mm;

Outer tube material:stainless steel tube or titanium tube(optional),Φ38x2x15000mm

Water flows in the internal titanium tube,anti-corrosion;

Refrigerant goes through between outer tuber and inner tube.
The inner tube is made with twisted tubing,which can increse heat exchanging capacity and working efficiency.

Shape: Oval, Round, Or Square;

With fixing feet;

Good welding;
Water inlet&outlet:3/4''  NPT,BSPT/G1;;

Tested by filling 4.5Mpa nitrogen,no leak;
                          3.5 Mpa water,no leak
        

Insulated with 6mm sponge or without any insulation;


2015年1月23日星期五

Are you ready to increase up to 30% the efficiency of your Chillers and Condensing Units?


We can make it with titanium and stainless steel.
Twisted tube /corrugated tube will give you much benefit.

Because this design has many spiral projections on the inner and outer surface of the tube. The coefficient for overall heat transfer has been remarkably improved because of the turbulent flow effect on the inner surface and outer surface of the tube caused by the corrugation, more than 2.6 times and more than 1.3 times respectively ,in comparison with that for smooth tubes.


Parallel system---Titanium Heat Exchangers,Coaxial Water Cooled Condenser,Tube in Tube Type

Parallel system

Dual circuits and multi-circuits is available for bigger capacity heating requirement.
3Ton+3Ton coaxial condenser (tube in tube type) heat exchanger
Inner tube:titanium corrugated tube,outer tube:SS 304




 with Sponge Insulated

We can make any Ton capacity to meet your need,latest price please feel free to contact us.

2015年1月6日星期二

High Efficiency Co-axial Heat Exchanger

The coaxial heat exchanger ,also named tube in tube or double tube heat exchanger ,which can be used as condenser or evaporator,It consists of two tubes.
One inside (made from pure titanium) the other outside (made from stainless steel or titanium as application requested) .
Water is piped through the inner tube .Refrigerant is piped through the tube that encloses the inner tube. The refrigerant flows in the opposite direction than the water.
Gas pressure max 5.0 Mpa
Water pressure max 4.2 Mpa
Features:

1.High specific thermal performance through optimised inner tube , Heat  transfer capacity is 1.3-2.6 times of traditional tubes.
2.Compact configure,occupy small area ,one tenth as the traditional equipments 
3.Titanium material ,strong anti-corrosion,endure high temperature,pressure and corruption.
4.Design flux speed is 5.5m/s,less dirt.
5.Easy clean and maintain 
6.Low susceptibility to fouling
7.Compactable 
8.Fully welded construction,no welded  junction for whole tubing
9.Easy installation and durable.



Any interest ,please feel free to contact me directly
Email:gigitsai89@gmail.com
Tel:86-0757-85685612
Mob:86-13710199211
More heat exchanger design,welcome to visit our website:www.fsnantai.com
or http://fsnantai.en.alibaba.com